Weight: 0.51 kg
Light weighted GRP clamp used as the structural base foot for stanchion posts.
Maximum recommended stanchion post spacing is 1.25m
The stanchion post fits into the base foot and should be secured using an M10 bolt with penny washer and a penny washer & nut. There are no pre-moulded indents to show where the holes are to be drilled so they can be drilled at any convenient position using an10mm HSS drill bit. The holes to connect the base foot to the floor are 13mm to take M12 bolts. The type of bolt to be used depends on the substrate to which it is to be fixed.
Please note if fixing on an uneven ground a rubber pad or rubber washer will need to be used to prevent the foot from deformation and cracking.
GRP Base Foot
If you are unsure about a certain specification or would like to enquire further please contact us on the below:
T: 0131 333 4413